Antaira Industrial Ethernet Switches
LMP-0501-24 Series User Manual V1.1
8
2.6 Fiber Port
Antaira’s LMP-0501-24 series provides different models to support one major fiber optical port
and optional models for SC or ST type fiber connectors.
-
The multi-mode up to 2 km, 1310 nm in 50/125 µm, 62.5/125 µm
-
The single-mode in 30km, 1310 nm in 9/125 µm
When connecting the fiber port to another fiber port, please follow the figure below to connect
accordingly. Wrong connection will cause the port cannot work normally.
Caution
This is a Class 1 Laser/LED product. Don’t stare into the Laser/LED Beam.
2.7 Cabling
Twisted-pair segments can be connected with an unshielded twisted pair (UTP) or shielded
twisted pair (STP) cable. The cable must comply with the IEEE 802.3u 100Base TX
standard (e.g. Category 5, 5e, or 6). The cable between the equipment and the link partner
(switch, hub, workstation, etc.) must be less than 100 meters (328 ft.) long.
Fiber segment using single-mode connector type must use 9/125μm single-mode fiber
cable.
Fiber segment using multi-mode connector type must use 50 or 62.5/125 μm multi-mode
fiber cable.
Figure 2.6 - Fiber ports connection
