Antaira Technologies - Industrial PoE Injector
INJ-C200G-bt-T - Hardware Manual - v1.0
2.3 Top View Panel
Figure 2.3, below, shows the top panel of the product series:
Figure 2.3 - Top View Panel
2.4 LED Indicators
There are LED light indicators located on the front panel of the industrial PoE injector that display the
power status and network status. Each LED indicator has a different color and has its specific meaning,
see below in Table 2.1.
LED
Color
Description
Power
Green
On
Power Input 1or 2, or both is active
Off
Power Input 1 and 2 is inactive
PoE
Green
On
The port is supplying power to the powered-device
Off
No powered-device attached or power supplying
fails
Table 2.1 - LED Indicators
2.5 Ethernet Ports
●
RJ45 Ports
RJ45 Ports (Auto MDI/MDI-X): The RJ45 ports are auto-sensing for 10Base-T, 100Base-TX, or
1000Base-T connections. Auto MDI means that the switch can connect to another switch or workstation
without changing the straight-through or crossover cabling. See the figures below for straight-through and
crossover cabling schematics.
5
