PN: 6304X100G100XXX
4. LED Description
5. Technical Specifications
Standards
IEEE 802.3 & IEEE 802.3u
Switching Mechanism
Store & Forward
MAC table
1K Entries
Forward & Filter Rate
10Base-T 14,800 pps
(64 Bytes)
100Base-TX 148,800 pps
LED
Power, FDX, TP 100, TP Link/Act,
Fiber 100, Fiber Link/Act
Power
DC 5V, 1.6A
Power Consumption
5W
Weight
1.8LB
Dimensions
71mm x 97mm x 26mm(W x D x H)
Temperature
Operating: 0 ~ 50
o
C
Storage: -20 ~ 60
o
C
Humidity
5% ~ 90% RH
Safety
UL, CSA
Emission
FCC/CE Class A
UTP
Cat. 5 UTP cable
Fiber
50/125, 62.5/125, or 100/140
m multimode
8.3/125, 8.7/125, 9/125 or 10/125
m single-mode
6. Rear Panel DIP Switch
Pin 1 Off/On TP Auto-negotiation Enable/Disable
Pin 2 Off/On TP Speed 100M/10M
Pin 3 Off/On TP Duplex Full / Half
Pin 4 Off/On Link Alarm Disable/Enable
Default is set to
OFF
from PIN 1 to PIN 4
Please perform Power On reset after modifying the
DIP switch setting.
7. Link Alarm
The Link Alarm allows users to easily identify and
diagnose the linking status. If the Link Alarm switch is set
to Enable, the UTP and Fiber port can link up only when
both linking conditions are good. In addition, if any of the
fiber or UTP port link is down during operation, the other
port will also go down to alert the user. Turning the Link
Alarm switch to Enable provides users a transparent link
indication between two network devices interconnected by
the Fast Ethernet Switching Converter.
If the Link Alarm is disabled, the UTP and fiber port will link
up based on their individual linking condition. Further, if
the fiber port link is down during operation, it will not turn
off the UTP port link and vice versa.
Notice
The Link Alarm will be effective only when the TP
Auto-negotiation is enabled.
This version of user
’s guide is only valid for hardware
version H or later version.
FCU-100SX
Fast Ethernet
Switching Converter
User’s Guide
v2.9
LED
Color
Function
PWR
Green Lit when power is available
FX 100
Green Lit when FX port speed is 100M
FX Link/ACT Green
Blink
Lit when fiber link is up
Blink when traffic present
FDX
Green Lit when TP port Full Duplex Mode is
enabled
TP 100
Green Lit when TP port speed is 100M
TP Link/ACT Green
Blink
Lit when TP link is up
Blink when traffic present
