33
Rem
ote AP
– Lock to MAC
Enter the MAC address of the remote access point the device is connected to. This option
will only make the device connect to this access point. It is important when the connection
is point-to-point operation.
Remote AP - Preferred MAC
Enter the preferred MAC address of the access point the user of the devices wants to
connect when it initially is started up. A maximum of four MAC addresses can be entered.
Priority is from top to bottom. In the event all preferred MAC addresses are not available,
the device will then pick the matching SSID access point with the strongest signal.
Country Code
Different countries have different power levels and also frequency selections. To ensure
the device operation follows regulatory compliance rules, the operator should select the
country code where device will be used. The channel list, output power limits, IEEE 802.11
and channel spectrum width modes will be tuned accordingly to the regulations of the
selected country.
Station setting must match AP country code setting.
o
No Set Country
:
Option when check marked, only the frequency range is
available. 11n 2.4GHz is 2412-2462MHz.
Wireless Profile:
The
NG
is 11n 2.4GHz band and represents a mixed of 802.11
n
,
802.11
g
and 802.11b mod
e.
**
Station setting must match AP Wireless Profile setting.
Channel Spectrum Width
The 20M represents the data transmitted at a bandwidth of 20MHz. 20/40MHz and
represents the data transmitted at either 20MHz or 40MHz. In a noisy environment, it
automatically reverts back to 20MHz to be more resilient to the interference. In a situation
when auto fall back does not happen, manually change the channel spectrum width to
20MHz in order to help reduce interference on the link and improve performance.
* Note: The40MHz bandwidth is non-standard for the 802.11n/g mode of operation. If
you experience unstable performance change the channel spectrum width to 20M.
**
Station setting must match AP channel spectrum width setting.
Maximum:
Checking this box will result in a maximum Tx power output overriding the
regulation.
Obey Regulatory Power:
Checking this box will obey with the Tx power output by country.