6-15
Programming the SLCnet Card
Overview
The Z-28 FACP supports up to 250 SLCnet points.
The PC Programmer represents all SLCnet points as the SLCnet card. Opening this card
allows you to view and program the device type, point type, custom label, and mode (sounder
base smoke detectors only) for each SLCnet point.
Figure 6-8 shows the location of the SLCnet card within the Active Card List.
Figure 6-9. SLCnet Card Icon
Step 1. Open the SLCnet
Card
Double click on the SLCnet icon, shown in Figure 6-8. A window similar to the following
appears.
Continued on next page
Figure 6-10. Card Data Entry Window for SLCnet
