AUTOPULSE Z-28 Ext
Installation Instructions
©2002 TEPG-US. All specifications and other information were current as of publication and are subject to change without notice.
Part No. 579-427
Doc. No. 431308
Rev. A
SLCnet
Notification Appliance Circuit (NAC) Extender, Part No. 430674 (120VAC) or Part No.
430675 (220/240VAC) is a self-contained adjunct panel for use with an AUTOPULSE Z-28
Releasing Panel. The base version of the NACext is a single-board system consisting of four
NACs, a power supply and charger, an SLCnet slave interface, and two conventional NAC inputs
for hardwired control (not applicable to the NACext when used as an SLCnet device). Option
cards are available to provide the following additional capabilities:
•
Class A Adapter Option Card, Part No. 430677 -- allows fault tolerance in the case of open circuit
wiring faults on the NACs.
•
NAC Option Card, Part No. 430676 -- adds four conventional Notification Appliance Circuits.
Upon unpacking your Ansul product, inspect the contents of the carton for shipping damage. If
damage is apparent, immediately file a claim with the carrier and notify your distributor.
This publication discusses the following topics:
Topic
See Page #
Cautions and Warnings
2
Overview 3
Identifying Optional Equipment
7
Configuring and Wiring SLCnet Operation
9
Hardwired Operation -- Conventional A/Vs
11
System Installation
16
SLCnet and AVsync are trademarks of Tyco International Services AG or its affiliates.
Introduction
Inspecting Contents
of Shipment
In this Publication
