12
6.5 Adjusting Gain
• Unscrew the Handheld Microphone.
-10dB
0dB
CHANNEL
CHANNEL
CHANNEL
BATT.
DC OUT
CHANNEL
BATT.
BATT.
• Connect the supplied DC 1.5 cable to the
receiver and the transmitter. When charging
the transmitter the LCD display would flashing
all the time until stop flashing it means
charging completed. Charging time will vary
depending on depth of discharge.
CHANNEL
CHANNEL
BATT.
CHANNEL
BATT.
CHANNEL
BATT.
BATT.
• When the LCD display shows the low battery
power level and the battery inserted is
rechargeable.
• Using the supplied DC plug cable directly
connect to DC out on the receiver and
charging input on the transmitter.
• Note:
**Turn the transmitter off when charging.**
**Never try to recharge dry (alkaline) batteries. **
• 0dB: Switch the Gain selector to the 0dB
position when using the normal vocal
input.
• -10dB: Switch the Gain selector to the
-10dB position for
• Use this to adjust for input level.
• Switching the selector to the Mic position
when connecting to a microphone with
normal audio input level.
• Switching the selector to the Line position
when connecting a high level instrument
input.
OPEN
6.4 Charging connection
LOW
FULL
SET UP
CHARGING CONNECTION
louder vocal situations.
