12
- EN
To start a new program after the program
is over or to interrupt the program, the
childproof lock should be deactivated. To
deactivate the child-proof lock, press the
same buttons again for 3 sec.
C
2 beeps when activating and 1 beep when
deactivating the child-proof lock is heard.
Ending the program through
canceling
The program which is selected first will keep
on going even if the position of the program
selection button is changed. A new
program can be selected and started after
“Program cancel” is activated in order to
change the drying program.
In order to cancel the selected program; press
“Start/Pause/Cancel” button for about 3
seconds. The “Filter cleaning”, “Water tank”
and “End/ Anti-creasing” warning LEDs
will light up at the end of this period for
reminding purposes.
A
As the inside of the machine will be
excessively hot when you cancel the
program while the machine is running,
This appliance’s packaging material is recyclable. Help recycle it and protect the environment by
dropping it off in the municipal receptacles provided for this purpose. Your appliance also contains
a great amount of recyclable material. It is marked with this label to indicate the used appliances
that should not be mixed with other waste. This way, the appliance recycling organised by your
manufacturer will be done under the best possible conditions, in compliance with European
Directive 2002/96/EC on Waste Electrical and Electronic Equipment. Contact your town hall or
your retailer for the used appliance collection points closest to your home. We thank you doing your part to
protect the environment.
EN
2
Height (adjustable)
85.0 cm
Width
59.5 cm
Depth
54 cm
Capacity (max.)
7 kg
Weight (net)
37 kg
Voltage
See type label
Rated power input
Model code
Type label is located behind the loading door.
Technical Specifications
activate the ventilation program to cool it
down.
A
When your machine is stopped while
running any of the programs; if the position
of the program selection knob is changed,
then an audio warning will be heard since
the running program is not cancelled
(provided that the “Cancel audio warning”
function is not selected). Machine will not
operate even the “Start/Pause” button
is pressed, unless it is returned to the
previously running program. You must
cancel the ongoing program in order to
change the drying program.
End of program
The “End/Anti-creasing”, “Filter cleaning” and
“Water tank” warning LEDs on the program
follow up indicator will light up when the
program comes to an end. The door can be
opened and the machine becomes ready
for a second cycle.
Press the “On/Off” button to shut down the
machine. Clean the filter and drain the
water tank after each drying.
