LED DISPLAY
1 LED flashes:
arging is in process, charging status < 30%
1 LED lights permanently /
1 LED flashes:
charging is in process, charging status >
30% / < 60%
2 LEDs lights permanently /
1 LED flashes:
charging is in process, charging status >
60% / < 100%
3 LEDs lights permanently: charging process completed / battery is
fully charged
3 LEDs flashes:
reverse polarity of battery, please insert
correctly
ENVIRONMENT
Do not dispose of this charger in the normal household waste. Please
return it to your dealer, nearest recycling centre or collection point.
Please also recycle all packing materials.
CARE & MAINTENANCE
To make sure that the charger works properly, please keep the con-
tacts free from dirt and dust. To clean the unit disconnect it from the
mains and only use a dry clean cloth.
TECHNICAL DATA
Input:
5V DC / min. 1000mA
Output:
1x 3.6/3.7V / 1000mA (Li-Ion)
2x 3.6/3.7V / 500mA (Li-Ion)
1-2x 1.45V / 500mA (NiMH AA/AAA)
Input:
5V DC / min. 2000mA
Output:
1-2x 3.6/3.7V / 1000mA (Li-Ion)
1-2x 1.45V / 500mA (NiMH AA/AAA)
DISCLAIMER
Information in these operating instructions can be changed without
prior notice. ANSMANN cannot accept liability for direct, indirect,
accidental or other claims by not using this charger as indicated by
these operating instructions. Consequential losses are not accepted
at any time.
WARRANTY NOTICE
We hereby offer a 3 year warranty on this charger. This does not apply
to damages caused by: low quality batteries leaking inside the char-
ger, non-compliance of the operating instruction or physical damage
due to lack of care.
Technical details subject to change without prior notice. No liability accepted for
typographical errors or omissions. 10/2016
Deutsch |
English
| Français | Español | Nederlands | Pусский
Svenska | Suomi