GB
inStRuCtiOn MAnuAl AES3
Dear Customer,
Thank you for choosing to buy the ANSMANN AES3 PC Energy Saving Mains Socket with Zero-Watt Technology.
This AES3 prevents any unnecessary standby power consumption from your electronic devices. Thanks to the
learning function, the device is suitable for almost all applications. Please read the following instruction
manual before use. We hope you will be happy with our product. Your ANSMANN Team
SAFEtY inStRuCtiOnS
> Please read the operating instructions carefully and observe the safety instructions!
> Do not use the PC Energy Saving Mains Socket if there are any signs of damage to the housing,
mains pins or cable. Please contact an authorized dealer!
> Keep the PC Energy Saving Mains Socket in dry places!
> In order to avoid the risk of fire and/or electric shock, the PC Energy Saving Mains Socket must be
protected against high humidity, water and excessive heat!
> The maximum load of this PC Energy Saving Mains Socket is 2500 Watt or 10A. Make sure when
connected to a device that this value is not exceeded!
> Before cleaning the PC Energy Saving Mains Socket disconnect it from the mains and only use a
dry cloth!
> Do not attempt to open the PC Energy Saving Mains Socket and keep it away from children’s
reach!
> Children should be supervised to ensure that they do not play with the appliance!
> The appliance is not to be used by children or persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction!
> If the safety instructions are not followed it may lead to damage to the PC Energy Saving Mains
Socket and could cause injury!
> Only plug the PC Energy Saving Mains Socket into a correctly fitting mains socket!
FunCtiOnAl OVERViEW
> Intelligent PC Energy Saving Mains Socket with Zero-Watt Technology
> Flexible: avoid standby power consumption in almost all applications
> Cuts-off standby devices automatically from the mains when not in use
> Saves energy, money and the environment
> No more unnecessary standby power consumption
> 2500 Watt (10A) operating capacity
OPERAtiOn
1. Plug the PC Energy Saving Mains Socket into a suitable mains socket.
2. Connect the PC or another electronic device to the PC Energy Saving Mains Socket. Use an
appropriate multiple socket if you would like to use several devices. Please always make sure that
the maximum load of the PC Energy Saving Mains Socket will not be exceeded.
3. Press for approx. 3 seconds the red operating button to activate the PC Energy Saving Mains
Socket. The power supply is now established for one minute.
4. Please ensure that all connected devices are on standby. If necessary put the devices on standby