EN
18
USE
FUNCTIONS
Press the buttons on the control panel or
remote control as follows:
POWER
: Press the power switch to
start and switch off the product.
SPEED
: Press the button to set
the required fan speed (HI = high,
MED = medium, LOW = low).
MODE
: Press the button to select
function mode – normal (NM),
natural (NT) or sleep mode (SL).
TIMER
: Press the button to activate
the timer function (0.5 to 8
hours). The set time is shown on
the display. Press the button for 3
seconds to increase the set time.
OSC
: Press the button to start and
switch off the oscillation function.
MAINTENANCE
NOTE:
Pull out the plug from the
power point before installation
and/or cleaning.
The product should be cleaned
once a month.
1. Clean the fan with a soft
cloth moistened with a mild
detergent. Make sure that
no water or other liquid gets
into the fan.
2. Carefully remove the casing
and take out the air filter.
3. Rinse the air filter in running
water.
4. Make sure the filter is
completely dry before putting
it back.
5. Replace the air filter and the
casing.
NOTE:
Do not use petrol, solvents or
detergents that can damage
the plastic parts.
Summary of Contents for 013881
Page 3: ...1 1 2 3 4 5 6 7 8...
