EN
6
Symbols
Safety class II.
For indoor use only.
Approved in accordance with the
relevant directives.
Recycle discarded product
in accordance with local
regulations.
TECHNICAL DATA
Rated voltage
230 V ~ 50 Hz
Output
21 W
Light source
3 W / 34 V
Socket E10
Safety class
II
Protection rating
IP20
USE
1. Remove the product from the packaging.
2. Screw the light sources into all of the holders.
3. Place the product in the required location.
4. Plug the plug into a power point.
SAFETY INSTRUCTIONS
• Only intended for indoor use.
• For decorative lighting use only.
• The product is not intended for general
lighting.
• Do not connect the product to the mains
power supply while the product is still in
the pack.
• The power cord on this product is not
replaceable, if damaged discard the
complete product.
• Do not expose the power cord or
conductors to mechanical loads. Do not
hang objects on the product.
• Choose a suitable place to put the product
where it is not causing an obstruction or a
hazard.
• Do not expose the product to water,
moisture or heat, and do not use in very
humid conditions.
• Do not expose the product to direct heat,
or use in the vicinity of naked flames, or
submerge in water.
• This is not a toy. Be careful if using the
product near children.
• Recycle the product at the end of its useful
life in accordance with local regulations.
WARNING!
Do not use the product if the light sources are
damaged or missing – risk of electric shock.