EN
6
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.
TECHNICAL DATA
Input voltage, transformer
230 V ~ 50 Hz
Output voltage, transformer
12 V DC
Output
12 W
Safety class
III
Protection rating
IP44
Ambient temperature
-10 – 70 °C
USE
1. Remove the product from the packaging.
2. Spread out the product at the required
place.
3. Make sure that the zip on the bottom of
the product is closed.
4. Connect the fan to the transformer.
5. Plug the plug into the mains power
supply. The fan starts automatically.
6. Lift up the product a little so that it fills up
more quickly with air.
7. Check that the product is stable when
inflated.
8. Fasten the lines in the eyelets on the side
of the product.
9. Attach the lines in the anchoring pins.
10. Secure the anchoring pins in the ground.
11. The product must be disconnected from
the mains power supply when deflated.
The air comes out more quickly if the
opening in the bottom is opened.
NOTE:
A few weights can be place on the bottom of
the product to make it more stable.
SAFETY INSTRUCTIONS
• Do not connect the product to a power
point while the product is still in the pack.
• Intended for indoor and outdoor use.
• Check that no light sources are damaged.
• Do not connect two or more string lights
together electrically.
• No parts of the product can be replaced,
or repaired. The whole product must be
discarded if any part is damaged.
• Do not use sharp or pointed objects
during assembly.
• Do not subject the power cord or wires to
mechanical stress. Do not hang any
objects on the product.
• This is not a toy. Do not allow children to
play with the product.
• Be careful if using the product near
children.
• Disconnect the transformer from the power
point when the product is not in use.
• This product must only be used together
with the supplied transformer and must
never be connected directly to the mains
supply without a transformer.
• The product is not intended to be used as
general lighting.
• Recycle products that have reached the
end of their useful life according to local
regulations.
WARNING!
The product must only be used when all the
seals are correctly fitted.
SYMBOLS
Read the instructions.
Safety class III.
