Ansell AlphaTec 66-320 model 151, Instructions For Use Manual

Page: 20 / 36

20
9.5 Bayonet ring
9.5.1 Function
The AlphaTec
®
Bayonet ring system consists of the following parts:
Sleeve ring – glued to the suit sleeve
Glove ring – where the glove is mounted
Inner ring *– goes inside the shaft of the rubber glove
Viton
®
rubber O-rings – one in the sleeve ring and one in the glove ring. Together with the
rubber glove they provide a triple sealing of the system.
Safety locking pin – prevents the system from unintentional opening
Closed position
Green marks opposite white marks.
To open the system and detach the
glove assembly, remove the red locking
pin, push the two rings together and twist
counter-clockwise until the white marks
meet.
Open (detach/attach) position
White marks opposite white marks.
To attach the glove ring, match the
white marks, push the two rings together
and twist clockwise until the white marks
meet the green marks. Insert the red
locking pin.