Network Camera User’s Guide
71/90
Appendix C: PING IP Address
The PING (stands for Packet Internet Groper) command is used to detect whether a
specific IP address is accessible by sending a packet to the specific address and waiting
for a reply. It’s also a very useful tool to confirm the device installed or if the IP address
conflicts with any other devices over the network.
If you want to make sure the IP address of the device, utilize the PING command as
follows:
z
Start a DOS window.
z
Type ping x.x.x.x, where x.x.x.x is the IP address of the device.
The replies, as illustrated below, will provide an explanation to the problem.
If you want to detect any other devices conflicts with the IP address of Network Camera,
also can utilize the PING command but you must disconnect the device from the network
first.
Summary of Contents for Vandal P/T
Page 1: ...H 264 Vandal P T Mega Pixel Multi Profile Network Camera User s Manual Firmware Version 5 0 0...
Page 26: ...Network Camera User s Guide 26 90 About Click About to show this ActiveX information...
Page 89: ...Network Camera User s Guide 89 90 Click Details Select Universal Plug and Play Click Ok...
