Default Settings:
•
Wireless Mode: Ad-Hoc (Peer-to-Peer)
•
Channel: 6
•
SSID: DWP1000-xxxx (xxxx is the last 4 digits of wireless print server’s
MAC address)
•
IP Address: 192.168.0.10
•
Subnet Mask: 255.255.255.0
•
Gateway: 192.168.0.254
•
Username: admin
•
Password: 0000
Ad-hoc (Peer-to-Peer) Mode
Hardware Installation:
1. Turn off the printer’s power.
2. Connect wireless print server into the printer’s USB port. Use the included
USB extension cable if necessary.
3. Connect the AC power plug into wireless print server.
4. Turn the printer’s power on.
Note:
Please connect your printer with computer locally, and then install printer
driver in your system in advance.
2
Summary of Contents for 5009/DWP1000-Series
