Anrtisu Cell Master MT8212B, User Manual, Page: 212 / 294

Step 7. Press the
Impedance
soft key and choose
75
W or
120
W . Press
Back
to return to
the previous menu.
Step 8. Select the
More
soft key to access more menu selections.
Step 9. Press the
Clock Source
soft key and select
External
clock. Press
Back
to return
to the previous menu.
Step 10. Press the
Setup Error Insert
soft key and select
Bit
,
BPV
,
Framing Bits
,
RAI
or
AIS
as appropriate for the measurement.
Figure 10-6 illustrates some of the key information of the E1 measurement Setup.
BERT Measurement
Step 1. Press the MEAS/DISP key and then the
BERT
soft key.
Step 2. Press the
Measure Duration
soft key and use the
Up/Down
arrow key to select
the duration of the measurement, and press ENTER . Figure 9-7 illustrates an E1
measurement in raw data mode.
NOTE: The RUN/HOLD key can also be used to start or stop the measurement.
Chapter 10 E1 Measurements
10-9
Figure 10-6. Key Information of the E1 Measurement Setup
Figure 10-7. E1 Measurement Display