
MN469xC Series Multiport Test Set MM
PN: 10410-00730 Rev. D
2-1
Chapter 2 — Replaceable Parts
2-1
Introduction
This chapter provides replaceable parts information for MN469xC Series Multiport Test Sets.
2-2
Exchange Assembly Program
Anritsu maintains a module exchange program for selected subassemblies. If a malfunction occurs in one of
these sub-assemblies, the defective item can be exchanged. Upon receiving your request, Anritsu will ship the
exchange subassembly to you. You then have 45 days in which to return the defective item. All exchange
subassemblies or RF assemblies are warranted for 90 days from the date of shipment, or for the balance of the
original equipment warranty, whichever is longer.
Please have the exact model number and serial number of your equipment available when requesting this
service, as the information about your equipment is filed according to the instrument model and serial number.
For more information about this program, contact your local Anritsu Service Center.
2-3
Replaceable Parts
lists the replaceable parts found in the MN469xC Series Test Set. See
for locations.
Note
Instruments shipped to European Union countries after 22nd July, 2017 are compliant with the
requirements in the RoHS Directive, officially known as Directive 2011/65/EU. Instruments shipped
to European Union countries after 22nd July, 2021 are compliant with the requirements in the RoHS
amendment, officially known as Directive 2011/65/EU, Amendment 2015/863/EU. RoHS-compliant
replacement parts must be used to repair RoHS-compliant instruments.
Table 2-1.
Replaceable Parts List (1 of 3)
Part Number
Part Description – Drawing “A” Number
Use
2000-989
GPIB-Parallel Interface PCB Assembly
All Models;
non-RoHS compliant
3-2000-989
GPIB-Parallel Interface PCB Assembly
All Models;
RoHS compliant
ND70926<R>
High Band SPDT Switch Control PCB Assembly
– Mounts on top of A12, A13, A18, A19
All Models;
non-RoHS compliant
3-ND70926<R>
High Band SPDT Switch Control PCB Assembly
– Mounts on top of A12, A13, A18, A19
All Models;
RoHS compliant
ND70927<R>
Control PCB Assembly
All Models;
non-RoHS compliant
3-ND70927<R>
Control PCB Assembly
All Models;
RoHS compliant
3-40-183
Power Supply
All Models
ND70078<R>
Low Band Bridge – A20, A21
All Models;
non-RoHS compliant