Anritsu V255 Gen II Ultra-Wideband Bias Tee Maintenance And Operation Download Page 4

Page: 4 / 4

V255 OMM

Figure 2. Typical V255 Insertion Loss and Return Loss, 1 kHz to 1 MHz

Figure 4. Typical V251 Insertion Loss and Return
Loss, 40 MHz to 65 GHz

Figure 3. Typical Isolation between Data I/P and DC
Port

Figure 6. Typical Group Delay Performance measured
on V255

Summary of Contents for V255 Gen II Ultra-Wideband Bias Tee

Page 1: ...bandwidth The DC signal can be applied or extracted from the bias tee through an SMC con nector at the third port As with our other bias tees the V255 also has a one year warranty 3 SPECIFICATIONS Ta...

Page 2: ...herwise treat them roughly They are laboratory quality devices and like other such devices require careful handling d Keep Bias Tee Connectors Clean The pre cise geometry that makes the RF component s...

Page 3: ...Hz to 65 GHz 30 kHz to 65 GHz typical Insertion Loss 1 5 dB to 65 GHz typical Return Loss 12 dB to 65 GHz typical Rise Time 3 ps typical Group Delay 125 2 ps typical Max DC Voltage 10V maximum DC curr...

Page 4: ...5 Insertion Loss and Return Loss 1 kHz to 1 MHz Figure 4 Typical V251 Insertion Loss and Return Loss 40 MHz to 65 GHz Figure 3 Typical Isolation between Data I P and DC Port Figure 6 Typical Group Del...