Anritsu Spectrum Master MS2720T, User Manual

Page: 652 / 1035

TD-SCDMA/HSPA+ Signal Analyzer 4-8 Freq (Frequency) Menu
3GPP MG PN: 10580-00234 Rev. T 4-15
4-8 Freq (Frequency) Menu
Key Sequence:
Freq
Center Freq: Press this submenu key to set the receiver center frequency to
the desired value. Enter the frequency (2.7 GHz is the maximum value that
can be entered) by using the keypad, the arrow keys, or the rotary knob.
When entering a frequency using the keypad, the submenu key labels will
change to Units: GHz, MHz, kHz, and Hz. Press the appropriate units
submenu key. Pressing the
Enter key has the same effect as pressing the
MHz submenu key.
Signal Standard: Opens the Signal Standards list box in order to select
signal standard.
Channel: Opens the Channel Editor list box in order to select a channel
number within the range of the selected signal standard.
Set CF to Closet Channel: Moves the center frequency to the closest
frequency that matches a channel number in the current signal standard.
Decrement Channel: Decrements the channel by one channel.
Increment Channel: Increments the channel by one channel.
Figure 4-10. TD-SCDMA/HSPA+ Freq Menu
Freq
Center Freq
871.400 MHz
Signal
Standard
Channel
4357
Set CF
To Closest
Channel
Decrement
Channel
Increment
Channel
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com