Anritsu Spectrum Master MS2720T, User Manual

Page: 481 / 1035

4-11 Measurements Menu Channel Scanner (Option 27)
4-12 PN: 10580-00349 Rev. H Spectrum Analyzer MG
4-11 Measurements Menu
Key Sequence:
Measurements
Display Graph/Table: Toggles the display between table and graph
formats, see Figure 4-9 and Figure 4-10 for examples of the two formats.
Max Hold On/5 sec/Off: Turns on or off small yellow lines for every
channel/frequency on the display that indicate the highest level that channel
or frequency has reached. The 5 sec option holds the small yellow line at the
highest level in the last 5 seconds.
Channel Units Channel/Freq: Toggles the display channel units between
channel number and frequency.
Power Display Current/Max: The current power units are displayed at the
bottom of the channels, or the maximum power is displayed (activated only
when Max Hold is set to On or 5 sec).
Color Code Single/Dual: Channels can be represented in one color or two
alternating colors.
Graph Orientation Vertical/Horizontal: When Graph is selected in the
Display submenu, this key toggles the graph orientation between vertical
and horizontal.
Figure 4-8. Channel Scanner Measurements Menu
Note
Screen captured images are provided as examples. Measurement details shown
on your instrument may differ from the examples in this user guide
Display
Graph Table
Measurements
Max Hold
On 5 sec Off
Power Display
Current Max
Color Code
Single Dual
Graph Orientation
Vertical Horizontal
Channel Unit
Channel Freq
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com