Anritsu Network Master MT9090A Series, Operation Manual, Page: 82 / 200

3-14 MT9090A/MU909011A Network Master User’s Guide
-
Use the Down Arrow key to move the
highlight to the Apply button, and then press
the Set key to close Setup.
Or –
-
Select the softkey ( F2 , F3 , or F4 ) for the next
desired setup screen.
Parameters Setups
The Parameters setups are test application specific. See “Fault
Locate Parameters Setups” on pages 4-7 through 4-9 for
details.
Auto Save Setups
The Auto Save setups are test application specific. See “Auto
Save Setups” on pages 4-9 through 4-12.
Set to Defaults
Use the following procedures to return the Setups to their
factory default settings.
Note
Note
If you enter Setup from the Top Menu screen, only the
General setups will be set to the factory defaults. To reset
the Setup defaults for a specific test application, launch
the given test application and then enter Setup.
To reset the General Setup defaults from the Top Menu:
1. Enter the Top Menu screen. See “Top Menu” on
page 3-27 for details.
2. Press the Menu/Power key .