Anritsu Network Master MT9090A Series, Operation Manual, Page: 110 / 200

4-12 MT9090A/MU909011A Network Master User’s Guide
-
the third key press returns to Alphabet
mode.
d. Repeat steps 4b and 4c to complete the
filename prefix and then press
OK ( F4 ). The
SoftkeyBoard closes and the new prefix is
displayed in the Filename Prefix field
5. Highlight the Sequence Number field and then
press the Set key . The SoftkeyBoard screen appears,
set to Numbers mode.
a.
Use the BKSP softkey ( F2 ) to clear the current
number.
b. Use the Left and Right Arrow keys to select
the desired number from the number matrix.
c. Press the Set key to add the highlighted
number to the number field.
d. Repeat steps 5b and 5c to complete the
sequence number and then press
OK ( F4 ). The
SoftkeyBoard closes and the number is
displayed in the Sequence Number field
6. When you have finished setting the desired Auto
Save parameters:
-
Use the Down Arrow key to move the
highlight to the Apply button, and then press
the Set key to close Setup.
Or –
-
Select the softkey ( F1 , F2 , or F3 ) for the next
desired setup screen.