Anritsu Network Master MT9090A Series, Operation Manual, Page: 34 / 200

1-2 MT9090A/MU909011A Network Master User’s Guide
Basic Configuration
The basic configuration of the unit includes:
•
MT9090A Mainframe
•
MU909011A Drop Cable Fault Locator module
•
AC charger/adapter
•
Ni-MH battery pack
•
1 Optical Adapter
•
User’s Guide (operation manual)
Powering Up the Unit
The unit can be powered externally by using the AC
charger/adapter (see “AC Charger/Adapter” on page 2-12) or
internally by using the rechargeable Ni-MH (Nickel-Metal
Hydride) battery pack (see “Installing the Ni-MH battery
pack” on page 2-7). In the absence of either the AC
charger/adapter or the rechargeable Ni-MH battery pack you
can power the unit by using 4 AA Ni-MH batteries.
Note
Note
The AC charger/adapter used must be the one supplied
by Anritsu with the Network Master. Use of another AC
charger/adapter may result in damage to the unit and/or
the Ni-MH battery pack.
Start Up Sequence
1. Press the Menu/Power key .
2. The unit performs a self-test during which the
Anritsu splash screen appears briefly, followed by
the Network Master splash screen.
3. When the self-test is complete, the unit launches the
the Fault Locate application at the Power Meter