Anritsu Network Master MT9090A Series, Operation Manual, Page: 139 / 200

MT9090A/MU909011A Network Master User’s Guide 4-41
For details on setting up the Auto Save function see pages 4-9
through 4-12.
Saving Files Manually
You can perform a manual file save when AutoSave is not
enabled. See “Auto Save Setups” on page 4-9 for details on
disabling AutoSave.
To manually save files:
1. At the completion of a test, press the Menu/Power
key .
2. Highlight Save in the pop-up menu and then press
the Set key .
3. The Mass Storage Save screen appears with the Save
As field highlighted.
Figure 4-25: Mass Storage Save Trace screen
4. If you want to change the filename, highlight the
Save As field (if not already highlighted) and then
press the Set key , the SoftkeyBoard screen appears.