Anritsu MX183000A, Operation Manual, Page: 176 / 226

Chapter 5 Remote Control
5-70
:CALCulate:DATA:EALarm? <result>
Parameter <result>=<STRING PROGRAM DATA>
Refer to Table 5.9-4 for details of <result>.
Response <string>=<STRING RESPONSE DATA>
Table 5.9-4 Parameter
Items <result1> Format
Error Count "EC" Form1
Bit Count "BITS" Form1
Bit Error Rate "BER" Form2
Pass/fail judgment "JUDGe" String("PASS","FAIL","---")
Table 5.9-5 Response Format
Items Format Description
Form1
Integer "XXXXXXX" For 0 to 9999999
"X.XXXXEXX" For 1.0000E07 to 9.9999E17
"-------" No data corresponds to a query.
Form2
Decimal "X.XXXXE-XX" For 0.0001E–18 to 1.0000E00
"-------" No data corresponds to a query.
Function Queries the BER Measurement results (BITS).
Example
> :CALCulate:DATA:EALarm? "BITS"
< "1.0000E12"
:SENSe:MEASure:BER:IPADdress <address>
Parameter <address>=<STRING PROGRAM DATA>
“xxx.xxx.xxx.xxx” IP address
Function Sets an IP address of the USB3.1 Receiver Test Adapter to be connected.
Example To set the IP address 192.168.0.10:
>:SENSe:MEASure:BER:IPADdress “192.168.0.10”
:SENSe:MEASure:BER:IPADdress?
Response <address>=<STRING PROGRAM DATA>
“xxx.xxx.xxx.xxx”
Outputs the format 223.255.255.254.
Function Queries the setting value of the connection destination IP address.
Example
>:SENSe:MEASure:BER:IPADdress?
< “192.168.0.10”