1. Preparation
QSG-2
PN: 10410-00738 Rev. C
VectorStar MN469xC QSG
MN469xC Series Multiport Test Set
This quick start guide provides a brief overview of the MN469xC Multiport VNA System assembly. For
important safety and compliance information and for more details about the assembly, configuration, setup,
and initial equipment test, refer to the
VectorStar™ MN469xC Series Multiport VNA Test Set Installation
Guide, PN: 10410-00728
, found on the CD-ROM or at the Anritsu web site (
www.anritsu.com
).
1.
Preparation
1. If mounting on a workbench surface, first position the MN469xC Multiport Test Set with access to its
front and rear panels. Place the VNA on top.
2. If mounting into rack or console, make sure the Test Set has been installed, and that the rack/console is
carefully positioned on a flat and level surface. If equipped, make sure any casters are locked. Use two
people to lift the VNA unit and two to guide it into its shelf rails.
Caution
An MS464xA/B VNA unit is heavy. To avoid personal injury, it must be lifted and
maneuvered by at least two people during installation.
The test loops on the front and rear panels of the VNA are delicate. Be careful not to
bump or bend the test loops.