Anritsu MG369 C Series, Programming Manual

Page: 124 / 266

3-4 Commands Command Directory
3-24 PN: 10370-10374 Rev. F MG369xC GPIB PM
D1 <value> <unit>
Description:
Opens the internal pulse delay1 parameter.
Functional
Category:
PARAMETER ENTRY
Value:
30 ns to 167 ms at 100 MHz pulse clock rate; 100 ns to 419 ms at 40 MHz pulse clock rate;
300 ns to 1.6 s at 10 MHz pulse clock rate
Units:
SEC, MS, US, NS
Example:
PTG3; D1 100 US; IP
Turns on internal pulse trigger delayed by 100  s.
Output Command:
OD1
(  s)
Related
Commands:
IP
,
PMD(x)
,
PTG(x)
Front Panel Key: Modulation | Pulse
(internal)
| Wdth/Dly List. . . | Edit Selected
D2 <value> <unit>
Description:
Opens the internal pulse delay2 parameter.
Functional
Category:
PARAMETER ENTRY
Value:
30 ns to 167 ms at 100 MHz pulse clock rate; 100 ns to 419 ms at 40 MHz pulse clock rate;
300 ns to 1.6 s at 10 MHz pulse clock rate
Units:
SEC, MS, US, NS
Example:
PMD2; D2 100 US; IP
Turns on internal pulse doublet with a 100  s delay before the 2nd pulse.
Output Command:
OD2
(  s)
Related
Commands:
IP
,
PMD(x)
,
PTG(x)
Front Panel Key: Modulation | Pulse
(internal)
| Wdth/Dly List. . . | Edit Selected
D3 <value> <unit>
Description:
Opens the internal pulse delay3 parameter.
Functional
Category:
PARAMETER ENTRY
Value:
30 ns to 167 ms at 100 MHz pulse clock rate; 100 ns to 419 ms at 40 MHz pulse clock rate;
300 ns to 1.6 s at 10 MHz pulse clock rate
Units:
SEC, MS, US, NS
Example:
PMD3; D3 100 US; IP
Turns on internal pulse triplet with a 100  s delay before the 3rd pulse.
Output Command:
OD3
(  s)
Related
Commands:
IP
,
PMD(x)
,
PTG(x)
Front Panel Key: Modulation | Pulse
(internal)
| Wdth/Dly List. . . | Edit Selected