MA8100A UG
PN: 10580-00422 Rev. E
2-1
Chapter 2 — Installing TRX NEON
2-1
Introduction
In-building coverage mapping of RF data captured with an Anritsu Handheld Spectrum
Analyzer requires the use of a TRX NEON software, PC, and an Android smart phone or
tablet. The Anritsu spectrum analyzer, Android device anf PC are not included and must be
provided by the user. The TRX systems NEON Command, NEON Personnel Tracker, and
NEON Signal Mapper are downloaded from the TRX Systems website.
2-2
Registration and Installation
A NEON account is required to log in to the website to log in and register. To obtain details on
how to create a NEON account, go to:
https://docs.trxsystems.com/subscription/
Once registered, see the NEON Signal Mapper Quick Start Guide and follow the instructions
provided:
https://docs.trxsystems.com/quick-start/
The Quick Start Guide also provides instructions for:
•
Site Planning
•
On-Site Signal Mapping (Android)
•
Generate Heat Map (PC)
•
View Location Data (PC)
2-3
NEON Command System Requirements
Follow the instructions provided to register for NEON and to install the software. Review the
PC and Android requirements before installing. NEON Command is installed on a PC that
will serve as a Command Station. While NEON Signal Mapper is an Android app. the
maximum number of licensed Command Stations and Android devices depends on the
MA8100A TRX NEON Signal Mapper subscription that your company purchased.
2-4
NEON Signal Mapper Software
After registration, you will receive an email with the subject line “Welcome to NEON!”
inviting you to join your company’s NEON subscription. Click the
Register for NEON
button in
the email and create your login account as described in
.
Proceed with the steps below after you have registered for a login account.
1.
Open a Web browser on your Android device and go to
2.
Log in to your NEON account.
3.
On the Downloads page, tap the
NEON Signal Mapper
button.
