MA25101A UG
PN: 10580-00476 Rev. B
2-1
Chapter 2 — Installation
2-1
Introduction
This chapter provides installation procedures for the PCIe card and both the PCIe card software driver and
user interface software. Be sure to read the
below before starting
.
ESD Caution
The equipment discussed in this manual is susceptible to electrostatic discharge (ESD) damage. Operators
should exercise practices outlined within industry standards such as JEDEC-625 (EIA-625), MIL-HDBK-263,
and MIL-STD-1686, which pertain to ESD and ESDS devices, equipment, and practices. Because these apply
to the user’s PC and the analyzer, it is recommended that any static charges that may be present are
dissipated before disassembling the computer case or connecting cables or antennas to the analyzer. It is
important to remember that the operator may carry a static charge that can cause damage and these charges
should be dissipated through proper grounding. Following the practices outlined in the above standards will
ensure a safe environment for both personnel and equipment.
Summary of Contents for MA25101A
Page 33: ......
