Anritsu BTS Master MT8222A, User Manual, Page: 48 / 115

Basic Measurement Setups 3-7 Setting Up Markers
BTS Master UG PN: 10580-00156 Rev. T 3-7
3-7 Setting Up Markers
Press the
Marker
main menu key to display the Marker menu.
Selecting, Activating, and Placing a Marker
1. Press the
Marker 1 2 3 4 5 6
submenu key so that the desired marker number is
underlined. Each press of the
Marker
key selects the next higher number (cycling from
6 back to 1 again). Press
Shift
, then the
Marker
key to backward through the marker
list.
2. Press the
On Off
submenu key so that
On
is underlined. The selected marker is
displayed in red, ready to be moved.
3. Use the rotary knob to place the marker on the desired frequency.
4. Repeat Step 1 and Step 2 to activate and move multiple markers.
Selecting, Activating, and Placing a Delta Marker:
1. Press the
Marker 1 2 3 4 5 6
submenu key so that the desired delta marker number is
underlined.
2. Press the
Delta On Off
submenu key so that
On
is underlined. The selected marker is
displayed in red, ready to be moved.
3. Use the rotary knob to place the delta marker on the desired frequency.
4. Repeat Step 1 and Step 2 to activate and move multiple markers.
Viewing Marker Data in a Table Format
1. Press the
More
submenu key.
2. Press the
Marker Table On Off
submenu key so that
On
is underlined. All markers and
delta marker data are displayed in a table under the measurement graph.