manualshive.com logo in svg

Anritsu BTS Master MT8221B, User Manual

Share
Download
Anritsu BTS Master MT8221B User Manual Download Page 89

BTS Master UG

PN: 10580-00207  Rev. E

8-1

Chapter 8 — Master Software Tools 

8-1

Introduction

This chapter provides a brief overview of Master Software Tools (MST), firmware update, and 
emergency repair procedures. For detailed information about Master Software Tools, refer to 
the MST Manual on the CD-ROM that was included with the BTS Master. The major sections 
of this chapter include:

•

“Master Software Tools Overview” on page 8-1

•

“MST Feature Overview” on page 8-1

•

“Updating Instrument Firmware” on page 8-2

8-2

Master Software Tools Overview

Anritsu Master Software Tools is a Microsoft Windows 2000 and Windows XP compatible 
program for transferring and editing saved measurements, markers, and limit lines to a PC. 
Master Software Tools will not function on earlier versions of the Microsoft Windows 
operating system. 

8-3

MST Feature Overview

Capturing or Retrieving Traces

MST includes a feature to capture the current screen and associated data from the test 
instrument to the Master Software Tools Graphic Display Editor window. Saved files on the 
test instrument can also be retrieved and displayed or edited with Master Software Tools.

Editing Graphs

MST can be used to change the scale, limit lines, and markers in a measurement through the 
Edit Graph button in the workspace toolbar, or through the Context Menus.

Context Menus

Context Menus are accessed by right-clicking the mouse on an active measurement screen in 
the Graphic Display Editor Window. Context Menu functions may include commands that are 
also available on the pull down menus and toolbar buttons, or functions, commands, and 
options specific to the active measurement window.

Overlaying Traces

Trace Math and Overlays allow for comparing multiple traces.

Folder Spectrogram

Folder Spectrogram provides a simulated three dimensional view of a large amount of data in 
one set of graphs.

Script Master

Script Master is an editor to create files that set up measurement parameters and create 
automated test procedures that aid field techs or FAEs with measurement testing.

Summary of Contents for BTS Master MT8221B











































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands