Anritsu BERTWave MP2100B, Operation Manual, Page: 135 / 382

5.1 List of Setting Items
5-3
5
Generating Pulse Signal
Table 5.1-2 Setting Items of PPG
Item Description
Reference CLK Status
Display
Displays the reference clock synchronization status.
Red:
Reference clock cannot be detected.
Yellow: Reference clock was detected, but is not synchronized
with pattern data.
Green: Reference clock is synchronized with pattern data.
Relative Displays the amplitude voltage calculated by the set value at External
Attenuator Factor.
Data Length Displays the pattern length as bits.
To display the PPG setting screen
1. Touch [PPG/ED_Ch1], [PPG/ED_Ch2], [PPG/ED_Ch3], or
[PPG/ED_Ch4] at the function menu.
2. Touch [PPG], and then Figure 5.1-1 is displayed.
3. Touch [Main], and then Figure 5.1-2 is displayed.
4. Touch [Expand], and then the screen is changed to Figure 5.1-1.
Figure 5.1-1 PPG Setting Panel
XData in Figure 5.1-1 indicates the
Data
Out connector on the front
panel.
For the display and operation of ED Result, refer to 6.6 “Measurement
Result”.
Screen size
change button
Channel display
Pulse Pattern
Generator tab