Anritsu BERTWave MP2100B, Operation Manual, Page: 128 / 382

Chapter 4 Screen Operation
4-16
4.5 Simultaneous Measurement Start and Stop at
Multi-channels
This BERTWave can measure error rates for four channels and sample
waveform data for two channels simultaneously.
To start simultaneous measurement, touch the [ ] key shown in Figure
4.5-1 while the Measure lamp is lit.
To stop simultaneous measurement, touch the [ ] key shown in Figure
4.5-1 while the Measure lamp is lit off.
Figure 4.5-1 All Measurements Button