Anritsu 540 A Series, Operation Manual

Page: 71 / 208

OR
Hard Copy
PRINTER
PLOTTER
Menu Start Stop
Plots the screen display on plotter
Plots only the graticule data from the screen display
Plots only the measurement trace data
Plots only the titling data from the screen display
Plots only the cursor readout data.
DONE
Prints the measurement screen
display on the printer.
Selects the number of data points
to be printed per measurement
channel
−
26, 51, 101, 201, or 401.
Prints data only from the frequency
-marker measurement points.
Prints measurement limit data only.
TITLE ENTRY
XXXXX
ABCDEFGHIJKL
MNOPQRSTUVWX
YZ 0123456789
#( ) +- . , / < > ?
CLR DEL DONE
USE KNOB TO
SELECT TEXT
PRESS ENTER
OR SELECT
PREVIOUS
MENU
Up to twelve characters may be entered as an identifier
for the type of test (such as, TNSM for transmission,
RL for return loss, PWR for power or a name for operator ID).
Present Identity string displayed here, when selected.
Up to twelve characters may be entered as an identifier
for the device under test name.
Present Test Device string displayed here, when selected.
When Title Entry completed, press CLEAR
(or any other menu key) to exit.
Selected entry string displayed here.
Use knob or UP/DOWN keys to select desired character,
then press ENTER or SELECT. Repeat as necessary
to complete title string. Keypad keys may be used for
numeric character entry.
Select CLR to clear entire title entry: select DEL
to erase previous character entered; select DONE to exit.
Starts printing/plotting operation. The type of hard copy produced is
determined by the PRINTER/PLOTTER MENU options selected.
Stops Hard copy output operation for device indicated by LED(s).
If output is to printer, stop is almost immediate (set text).
If to plotter, the current data string is plotted and the plotter is left in a reset state.
PRINTER MENU
GRAPH
TABULAR:
26 POINT
51 POINT
101 POINT
201 POINT
401 POINT
MARKERS
LIMITS
ENTER TITLES
PLOTTER MENU
USE THEN
PRESS SELECT
KEY GROUP
PLOTTER MENU
PLOT ALL
PLOT ONLY:
GRATICULE
TRACES
TITLE
CURSOR
ENTER TITLES
PRINTER MENU
USE THEN
PRESS SELECT
SELECT TITLE
TO ENTER
IDENTITY
XXXXX
TEST DEVICE
XXXXX
DATE
ON
OFF
USE THEN
PRESS SELECT
GPIB
MODE CHANGE
WARNING:
SEE NOTE ON
REAR PANEL
SYSTEM
PLOTTER ONLY
USE THEN
PRESS SELECT
GPIB MODE
IS SET TO
SYSTEM
PLOTTER ONLY
GPIB MODE IS
NOT SELECTED
PRESS SELECT
TO CHANGE
GPIB MODE
To GPIB Address Setup menu
GPIB Interface Set to Plotter Mode
In the GPIB PLOTTER mode of operation,
only the 541XXA and external plotter may be
connected to the GPIB.
All frequency information printed or plotted by
models 54107/09/11 is in MHz. For all other models,
it is printed/plotted in GHz.
1
2
GPIB Interface NOT Set to Plotter Mode
*
1
2
)LJXUH +DUG&RS\.H\*URXS0HQXV
I I I FRONT PANEL HARD COPY
OPERATI ON KEY GROUP M ENUS
541XXA OM 4-15/4-16