anovafurnishings.com
888.535.5005 tel
Assembly InstructIons
F1031
4 ft Courtyard Gull Wing Bench
F1035
6 ft Courtyard Gull Wing Bench
tools needed:
1/2” Open-end or Box-end Wrench
•
Ratchet with 1/2” Socket
•
Level
•
24 x
5/16”
Washer
12 x
5/16”
Flanged Hex Nut
12 x
5/16” X 1.5”
Hex Head Bolt
Assembly:
The assembly is a two-person operation.
1. Inspect the shipping container contents for damage and to determine that all components and hardware are present.
2. Place the Bench Seat upside down on the shipping
packaging or other soft surface to avoid scratching the
product. Locate one of the Bench Supports and position
it near the end of the Seat.
3. Align the mounting holes in the Bench Support with the
holes in the bracket on one end of the Bench Seat. Install
a Washer onto one of the provided Bolts and insert
the Bolt through both parts, with the Bolt head on the
outside surface of the Bench Seat. Install a Washer and
Flanged Nut on the inside end of the Bolt.
NOTE: Installing the Bolt in this direction reduces the risk of
scratching during use.
Leave the hardware finger tight so that adjustments can
be made during assembly and leveling.
Install a Bolt and Washer through the other set of
mounting holes in that end of the Bench Seat and
Support and install a Washer and Flanged Nut. Again,
leave the hardware finger tight.
Assembly HArdwAre:
bencH components:
4. Attach the other Bench Support to the Bench Seat in
the same manner, installing the Bolts from the outside
inward. Leave the hardware finger tight.
1 x
Bench Seat
2 x
Bench Support
2 x
Cross Brace
2 x
Arm Rest
Support
Seat
Bracket
Washer
Flanged
Nut
Washer
Bolt
Washer
and Bolt
Washer and
Flanged Nut
packaging cardboard or
other soft surface
