Do not drag the assembled unit across any surface.
•
This product requires only periodic cleaning with a sponge and a solution of mild detergent and water to
•
remove surface dirt. Do not clean with a solvent or petroleum based products.
Furniture must not be used other than for its intended purpose and should be inspected regularly for loose,
•
missing, or broken hardware, and general instability.
Furniture that is damaged or appears to be unstable must be removed from service and be repaired or replaced.
•
Repairs must be made using only factory authorized parts and methods.
•
wArnInG
cAre And
mAIntenAnce
211 No
rth Lindbergh Blvd.
St. Louis, MO 63141
tel: 888.535.5005
web:
anovafurnishings.com
10/2012
Hex Head Bolt
and Flat Washer
Hex Head Bolt
and Flat Washer
Flat Washer
and Flanged Nut
Flat Washer
and Flanged Nut
Installing Tamper Resistant Hardware:
1. Orient the Breakaway Nut so the cone
shape is toward the Washer.
Breakaway
Nut Head
Breakaway
Nut Cone
Washer
Washer
Bolt Head
Breakaway
Nut Cone
Washer
Washer
Bolt Head
Hex Head
Breaks Off
2. After the fasteners have been
installed, torque the Breakaway
Nut using the Rachet with
3/4” Socket until the Hex Head
breaks off.
tools needed:
Ratchet with 3/4” Socket
•
9/16” Open-end or Box-end Wrench
•
If you purcHAsed A model wItH tAmper resIstAnt HArdwAre:
HArdwAre:
12 x
3/8”
Breakaway Nut
12 x
3/8” X 1.5”
Hex Head Bolt
24 x
3/8”
Flat Washer
4. Attach the other Rack End to the other
end of the Inner Rack in the same
manner, installing the 1.5” long Bolts
from the top. Use a wrench to tighten
the hardware after all Bolts are installed.
5. Install the Support using a Bolt with Washer in each mounting
hole and secure each Bolt with a Flat Washer and Flanged Nut.
6. Tighten all of the hardware and move the Bike Rack to the desired location.
7. Two weeks after installation, retighten all hardware.
