- -
The inlet pipe, screen filter or pump
chamber are blocked by foreign
materials.
Clean pipe, the foot valve or the pump
chamber, clean debris.
The vibrating pump.
The pump is fixed on the base.
Tighten the bolt base.
Debris in the pipe or the pump
chamber.
Check and clean the pipe and the pump
body.
The base is not stable enough.
Set the pump to the stable base.
The engine operates
intermittently or winding
motor burnt.
The engine is overloaded operation
for a long time.
Install the valve in the output, reduce water
yield.
The impeller is jammed or
overloaded for a long time.
Clean debris in the pump chamber; Operate
the pump below the nominal flow as much as
possible.
Improper grounding, broken wire or
electric pump has been struck by
lightning.
Look for the reason and replace the coils of
the motor. Check with your service center.
Mechanical seal leak
The mechanical seal is worn and torn
by impurities.
Clean or replace the mechanical seal.
Abnormal pump noise.
Bearing noise.
Replace with the same type of bearing.
The impeller is jammed.
Remove debris and dirt.
Delivery head inappropriate and
excessive.
Set to the range shown on the nameplate
before use.
The switch does not work
or pressure starts-stops
too frequently
The pressure is too low within the
tank.
Check and adjust the pressure between 1.4-
1.6bar
The pressure is too high within the
tank.
8. Disposal and recycling machine
Get rid of your appliance in an ecological way. We should not get rid of the
machines together with household garbage. Plastic components and metal can be
classified according to their nature and reciclarse.Los packaging materials used this
machine are recyclable. Please do not throw packaging in the household rubbish.
Pull these packages in an official waste collection point.
9. Warranty conditions
- The warranty period (1999-1944 CE Act) under the terms described below is 2 years from the
date of purchase on parts and labor against defects in workmanship and material.
The warranty does not cover in any case: - Natural wear and tear.
- misuse, neglect, careless operation or lack of Maintenance.- Defects caused by misuse,
damage due to manipulations by unauthorized personnel by Anova or use of non-original spare
parts.
Summary of Contents for BE1300P
Page 13: ......
