EN
4
1.
USER WARNINGS
Caveat
Please read the manual carefully. The manufacturer and/or distributor provide this parts
drawing only as a reference guide. No representation or warranty of any kind is made to the
purchaser that he or she is qualified to repair or replace any part of the product. All repairs and
replacement of parts must be performed by certified and authorized technicians, not by the
purchaser. Buyer assumes all risk andliabilities arising from your repairs to the original product
or your installation of replacement parts.
1.1. Mounting Warnings
1. Locate and identify all parts and product based on the list and illustration. Using first
four hex bolts, four washers and four hex nuts (17) attach the wheel mounting bracket
(9) to the column (8).
2. Put the wedge holder (6) in the middle of the handle holder (3), and then use the bolt
(21), washer (22) and pin (23) to connect the handle holder (3) with the handle holder.
wedge (6).
3. Connect the pneumatic tire changer wedge (4) to the wedge support (6) using the bolt
(19) and the bolt pin (20).
1.2. Security messages
Read all instructions before using this machine.
1. Keep the work area clean and safe. Make sure the area is not cluttered and is well lit.
Do not use in wet areas. Do not expose to rain.
2. Keep bystanders out of the work area. Do not allow unauthorized persons (especially
children) to use the product or other tools.
3. Always use the right tool for the job. Do not use any tool, including this product, for
purposes for which it was not designed.
4. Wear proper safety clothing and equipment. Follow the information on the warning
labels related to PPE: shoes, eye protection and gloves. Never wear loose clothing,
jewelry, or long hair that could get caught in the equipment.
5. Maintain proper posture and balance at all times. Do not stand on the product as you
could be seriously injured if it tips over or falls.
6. Check for damaged or missing parts before each use. Inspect for damaged or missing
parts to ensure unit is operating safely and properly. Repair or replacement of any
damaged or missing part must be performed by an authorized service center, and
unless otherwise stated in this manual, use only identical replacement parts.
7. Do not use this tool if you are tired or under the influence of medication or other
substances.
Summary of Contents for 99-556
Page 5: ...EN 5 2 PRODUCT PARTS...
