43
interface of
iVMS-4200
are shown below.
3.3.1 Add device
If your device have activated you can go Step 2 directly.
Steps:
1.Activate device
Go to
Control Panel
Device Management
On the bottom of the screen in the Online Devices section the screen will display all
devices on the network. The “Security” will display whether the DVR/NVR is active or
not .If the NVR is “Inactive,” highlight the NVR and press the
Activate
button to display
the “Activation” window
，
then enter a new password into the “Password” field
，
retype
the password into the “Confirm Password” field,press the
OK
button ,and then it will be
activated.