Annealing Made Perfect MARK II, Operator'S Manual, Page: 5 / 24

5
After turning the Annealer on the MODE SELECT screen will be shown.
To navigate through selections use the blue + and – buttons to cycle through the
options and the START button to enter a mode.
USING THE INTERFACE
At any time you can go back by pressing and holding down the – button and then
pressing the START button. Once you have selected your desired mode the +
and – buttons allow you to cycle through AZTEC or AMP MATE modes and cycle
through programs in the STANDARD mode.
Holding down either button will quickly scroll through STANDARD mode programs
in the desired direction. Mark II owners should always use AZTEC mode.
When pressing START and annealing a case for the first time on a new setting
the program lock will activate Program lock, preventing the setting from changing
during the annealing session. A * will appear on the screen. Pressing and holding
the + button until the * goes away will remove the lock.