background image

instructions can result in serious injury,   
including death.   

WARNING

!

 To reduce the risk of

electrocution, keep all connections dry and 
off the ground. Do not touch plug with wet 
hands. 

This machine is not intended for use by 
persons (including children) with reduced 
physical, sensory or mental capabilities, or 
lack of experience and knowledge, unless 
they have been given supervision or 
instruction concerning use of the machine 
by a person responsible for their safety. 
Children should be supervised to ensure 
that they do not play with the machine. 

WARNING!

 This machine has been 

designed for use with the cleaning agent 
supplied or recommended by the 
manufacturer. The use of other cleaning 
agents or chemicals may adversely affect 
the safety of the machine. 

WARNING!

 High pressure jets can be 

dangerous if subject to misuse. The jet 
must not be directed at persons, live 
electrical equipment or the machine itself. 

WARNING!

 Do not use the machine 

within range of persons unless they wear 
protective clothing. 

WARNING!

 Do not direct the jet against 

yourself or others in order to clean clothes 
or foot-wear. 

WARNING!

 Risk of explosion-Do not 

spray flammable liquids. 

WARNING!

 High pressure cleaners shall 

not be used by children or untrained 
personnel. 

WARNING!

 High pressure hoses, fittings 

and couplings are important for the safety of 
the machine. Use only hosed, fittings and 
couplings recommended by the 
manufacturer. 

WARNING! 

To ensure machine safety, 

use only original spare parts from the 
manufacturer or approved by the 
manufacturer. 

WARNING! 

Water that has flown through 

backflow preventers is considered to the 
non-potable. 

WARNING! 

The machine shall be 

disconnected from its power source by 
removing the plug from the socket-outlet 
during cleaning or maintenance and when 
replacing the machine to another function. 

WARNING! 

Do not use the machine if a 

supply cord or important parts of the 
machine are damaged, e.g. safety devices, 
high pressure hoses, trigger gun. 

WARNING! 

If an extension cord is used, 

the plug and socket must be of watertight 
construction. 

5

Summary of Contents for ABW-VAV-90P

















Reviews: