Preparing Before Using
2.
Clean the Spatula with
water or a cotton pad.
1.
Fully charge the scrubber,
LED INDICATOR will keep
on after fully charged.
How to use
②
※
※
※
Press the on/off button to start the machine. Briefly press the button
and select the ultrasonic cleaning mode. Hold the ion conducting
bar, carefully attach the spatula to the skin at an angle of about
30-45 ° and move it over the face in the direction of the arrow.
The blackhead of the nose and the care of the dirt part should focus
on, it is recommended to adjust according to their skin condition.
The spatula cannot be used on the same part of the skin for a long
time and must be moved constantly when it is used.
Depending on the brightness of the room, the water mist generated
by the vibration of the spatula head will be different.
※ Power button operation: short press the power button to turn on
the power, short press to change each mode. Only OFF is a long press.
①
※
Wash your face , then wipe your entire face with water or lotion.
Never use the device on dry skin.
Ultrasonic: Ultrasonic Vibration
skin
Move forward
to push
30-45°
5>
6>
