3
WARNING: To prevent electrical motor burnout, the maximum continuous
operating time is 1 minute. Allow it to rest for 45 seconds before using it again.
After 3 cycles of operation, allow the electric motor to cool down to room
temperature for approximate 30 minutes before using it again.
Product Assembly
1.
Before use, make sure the unit is on a clean, flat, dry surface near a power outlet.
2.
Securely position the motor unit on the cup (See Fig. 1).
3.
With the power cord disconnected from mains power,
select your desired blade and place it inside the large gear
housing, making sure the top of the blade is level to the top
of the large gear (See Fig. 2).
4.
Position and align the feeder on top of the blade and gear,
then twist clockwise to engage and lock in place.
5.
Wash and dry vegetables or fruit to be used.
6.
If necessary, cut the food to fit through the feeder.
7.
Cut the ends on the food and gently push the food pusher
into the flat end, submerging across the blade on the pusher
(See Fig. 3).
8.
Make sure feeder is free of any debris. Plug the unit into
mains power and press on the power switch to operate the
product (See Fig. 4).
9.
Slowly push the unit press with fruit or vegetable into
rotating blade (See Fig. 5).
NOTE:
When you reach the end of the fruit or vegetable and
the pusher cannot push any further, press the power switch to
turn the unit OFF, then carefully pull the pusher out. Remove
and discard the remaining fruit or vegetable.
If the fruit or vegetable gets stuck inside the feeder, turn the
unit OFF, unplug the machine from mains power, rotate the
feeder counter-clockwise to unlock and remove it to have
easier access to remove the remaining fruit or vegetable stuck
in the machine.
