Page 7 of 12
4 Operation Procedure
•
Place the appliance on a flat level surface in the position you will be using it
•
Fill with warm water heated to your desired temperature. Ensure the unit is unplugged
when filling.
•
Do not fill over “MAX” indicator line (8)
•
Keep Children, Pets and Infirm persons away from hot water at all times.
•
Never pour water over the Control Knob (3).
Note
: Always Test the water temperature before plunging your feet in to ensure it is
not too hot.
•
Plug in and switch on at power point.
•
From the Off position, rotate the control knob ¼ turn in either direction to the “Keep
Warm, Bubble, Vibration” position.
•
The unit will start to vibrate, the red power indicator light will turn on, the water heater
will turn on, to help maintain the water temperature, and the bubbles will start.
Note
: The inbuilt heater will not heat the water, it will only help maintain the water
temperature during use.
•
Rotate another ¼ turn to the “Keep Warm” position.
The unit will start to heat the water to help maintain the water temperature and the
vibration and bubbles will turn off.
OFF
Keep Warm
Keep Warm
Bubble
Vibration
Keep Warm
Bubble
Vibration