Page 21 of 24
Grasp the rotary brush and slide to the right and lift up and out.
Remove any hair, thread and debris etc. that may have caught around the
brush, end bearings, wheels or stuck in the openings.
After cleaning, refit the brush in reverse order to disassembling.
Align the end of the brush onto its drive spindle and rotate the brush until it
slides down onto the spindle, then push down on the brush until it is located
in position.
Flip closed the cover then rotate the small locking screw 1/8 turn
anticlockwise to lock. You can use a flat blade screw driver or a small coin.
