Page 13 of 16
5 Care and Cleaning
5.1 Cleaning
To ensure optimal shaving and trimming efficiency, the shaver and trimmer
must be cleaned regularly.
IMPORTANT: Do Not
use flammable liquids, chemicals, abrasive creams, steel
wool or scouring pads for cleaning.
DO NOT
press on the top of the shaving blade surfaces as you will damage
them.
The easiest and most sanitary way to clean the product is to wash the shaver
head part and the trimmer with fresh warm (not hot) water each time after use.
To do this:
•
Turn off the Shaver and ensure the USB cable has been removed from the
appliance.
•
Remove the Shaver Head. To do this, press in the buttons on the side of
the shaver head and pull the cap off.
•
You can brush out the whiskers with the small cleaning brush supplied and
then rinse the shaver head parts and the shaver head cap for a minute or
so until the whiskers have been washed away.
IMPORTANT
:
DO NOT
use high pressure water or compressed air to try
and clean as you will damage the appliance.
DO NOT
wipe the Blades with a towel or paper tissues as this will cause
damage to the shaver head.
Only use running tap water to rinse away the whiskers and allow the Blade
Sections to dry naturally before re-assembly.
