4
2.Assemble the crusher bar, blade, cutter and screw nut with the sticky tube as illustrated
in Fig. 2, and the appliance is ready to use.
Note:
Make sure the edge of the blade is faced towards the cutter when assembling.
Never assemble the blade reversely.
CAUTION: Make sure the appliance is disconnected from mains power when
assembling
.
3. Put the funnel on the sticky
tube.
4. Ensure that the rocker switch is set at
“
O
”
position, then connect the power cord
plug into a mains power outlet socket.
5. Press the rocker switch to “ON” position (the crusher bar and the blade will turn anti-
clockwise). When the appliance operates normally, feed pieces of meat piece into the
filler and push it down with the pressure bar.
Note
: Cut all foods into pieces (Sinewless, boneless and fatless meat is recommended,
approximate size: 20mm x 20mm x 60mm) so that they fit easily into the filler opening.
(e.g. beef)
