1. Hold the lid handle and pull it up to open the lid.
2. Fill the kettle with the amount of water required.
You can check the water fill level on the indicator window.
3. Press the lid down firmly to close it.
Make sure that the lid is closed
properly; otherwise the water kettle
may not switch OFF after boiling.
4. Fully unwind the power cord and run it through the cable guide channel on the power base.
5. Plug the mains cable into an earthed mains power
outlet socket that is within easy reach.
6. Place the kettle on the power base.
7. When the appliance powers ON, lights on each function key will blink three times. Then the
lights on the five-temperature function keys will turn on for 30 seconds, indicating the appliance
is in standby status. All the lights will turn OFF automatically if the appliance is unused (when no
temperature function key is pressed) after 30 seconds.
8. Press the corresponding temperature key to select the desired water temperature. The light on
the chosen temperature key will flash, and the kettle will start heating. When water temperature
reaches the selected temperature, the buzzer will sound 5 times and the light will turn ON
steady for 5S to remind the user that the water is ready for use.
9. When the appliance is heating and if you want to change it to another function, press the
desired function key direct to select the function.
10. If you wish to stop heating the water before it reaches the chosen temperature, press on
the chosen key again.
WARNING: Risk of scalding from hot water & steam.
* Be sure that the water kettle is switched OFF before taking it off the power base.
11. After the water has come to a boil, wait a moment, until the water has stopped simmering.
Then remove the kettle from the power base.
12. Pour the water out slowly to avoid splashing. Do not open the lid while pouring out the water.
* To prolong the life of the kettle, do not re-boil stale water. Pour it away and refill with fresh
water for boiling.
Lid handle
