8
HOW TO USE
IMPORTANT!
Before first use, open the air inlet grille by
pressing on the locking latch then pull. Unwrap the filters
before installing in the unit.
IMPORTANT! When placing the filters into the air purifier,
ensure the air inlet grille had locked into place or the unit will
not turn on.
1. Plug unit in to a 220-240V AC electrical outlet. POWER button
illuminates RED to show the unit is in standby mode.
2. Press the ON/OFF button to turn on the unit. The air quality
indicator light will illuminate, usually starting with a blue light until
it has time to sense the air quality and then it may change to an
alternate colour depending the air quality in the surrounding area.
3. The air purifier default setting is at Low speed.
4. To adjust the air purifier operates, follow the direction below.
Fan speed
To select speed, press FAN SPEED button repeatedly until the
desired fan speed is illuminated on the control panel. Fan speed will
cycle from Low, Med and High.
Auto mode/Sleep mode
Auto mode and Sleep mode utilise the same button. Pressing
AUTO/SLEEP button will cycle through these two settings.
Timer
To set automatic off timer, press TIMER button until timer display is
on desired time 2/ 4/ 6/ 8 Hr. Unit will automatically switch off once
selected time duration has lapsed.
Child lock
Press and hold the AUTO/SLEEP button for 3 seconds to activate
child lock function. The Child Lock indicator will illuminate. When the
child lock is on, all the other buttons are not responsive.
Press and hold the AUTO/SLEEP button for 3 seconds again to
deactivate the child lock.
